Destructive and Non Destructive Testing
|Min. Order:||1 Set/Sets|
|Packaging:||one set one unit ,carton packing|
|Place of Origin:||China|
Model No.: GT230
Pipeline Inspection System Pipe Doctor
Tensile test: measuring stress and deformation
Longitudinal, horizontal sample sections, arcs, and round specimens
Small diameter, thin wall large diameter, thick wall calibration distance.
Bending test: It can replace flattening test (for large-diameter tube)
Steel pipe process performance test
The general sewer dredge refers to the clogging of sewers in daily life, including the toilets, floor drains, sinks, sinks and other sewers. Some of these pipes are inadvertently dropped into foreign objects during installation or are blocked due to installation errors. In some cases, fouling occurs during the use of pipes, making the inner diameter of pipes thinner so as to affect normal discharge. In the above two situations, it is generally easy to dispose of by using a pipe dredging machine to directly dredge or to use pipes to clear particles. If you enter cement during the renovation process, it will be very difficult to clear. There are very few people who can deal with it effectively, so the cost is very high.
First of all, it is necessary to identify the main reasons for the blockage, rather than blindly clearing, because only when the cause can be taken correct and effective method of clearing; then according to the degree of blockage to select the correct method of clearing, if the general debris is blocked, You can use a simple tool to solve it yourself. If it is a serious blockage, ask a professional to clear it.
Actual pipeline endoscope can not only detect the tap water pipeline leaking point and intercepting can also detect scale deposition in tap water pipe, can be done according to the requirements of the water company use within the pipeline monitoring, water companies in addition to the regular monitoring of water quality, timing of pipeline internal condition monitoring is also very important, duct endoscopy has photos video recording, after every test can keep photos and video data, when again detection can be compared, so the data more accurate.Therefore, water companies have been popularizing the installation and use of endoscopes in order to seek more efficient management and monitoring methods.
This Pipe inspection robot is used for inspection for long pipe. and narrow, or underground that person can't go into for inspection directly
This sewer inspection camera is equipped with professional soft KEVLAR. and the lenght is optional ,according to the working condition
This camera can be automatical level . also can be made as customer's requirements for waterproof.
Pipeline endoscope is mainly applied to the maintenance and quality inspection of pipe products, specifically related to the following industries or components of pipeline exploration:
electronic and electrical industry;Automobile engines and hydraulic components;Inspection of industrial machinery, boilers, heat exchangers;Mechanical equipment and manufacturing equipment;
Railway, ship turbine, heater, diesel engine, boiler, etc.
Duct endoscopy is common things in our daily life, air-conditioning pipes, gas pipes, engine and pressure vessel, etc., as the growth of the pipe using time, pipeline will gradually accumulate dirt inside, inside weld, also will become increasingly serious corrosion, in order to understand the status of these pipes, usually can use the member - duct endoscopy in the industrial endoscope for nondestructive testing.
Can simply think that pipeline endoscope is used for pipeline to detect industrial endoscope, therefore the pipeline endoscope has the characteristics of industrial endoscope, and can be used for high temperature, toxic, radiation and the eye cannot directly observe pipeline inspection and observation, is advantageous for the pipe inner weld, corrosion, clogging, detect differences, foreign bodies, and so on and so forth.Due to the specific demand of pipeline inspection, pipeline endoscope has its own special structure while it has the characteristics of industrial endoscope.
Endoscope pipe inspection robot camera systemTechnical Features:
1. Splash-proof,anti-corrosion,can be used in different place.
2. Forward ,backward,turn freely and adjustable speed.
3. With ambient light and adjustable illumination.
4. Lens 360°rotation and reversal without death angle.
5. Focus length is adjustable ,no limited by space size.
6. Video,photo can be set at will.
7. Video can be storage and replay.
8. The machine is easy to clean, low cost maintenance.
Endoscope camera robot wheel made of copper and stainless steel ,with skid-resistance tooth.
PortablE electronic endoscope: jiutai portable electronic endoscope is a new nondestructive testing instrument that integrates light, machine and electricity to check, detect and analyze the internal quality of the cavity.Through CMOS photoelectric coupler, high brightness LED lighting source, industrial level LCD monitor, SD card storage and other components.Jiutai handheld electronic endoscope lens small, easy to carry.Generally, it is 2mm, 2.8mm, 3.9mm, 5.5mm, 6mm and 8mm.The lines range in length from 0.5 m to 10 m.It is applied to the detection of fine parts, such as mechanical casting, automobile maintenance, aircraft maintenance, etc., which cannot be directly observed by human eyes.Through front lens imaging, the internal structure of the detection part is finally displayed through the display screen to achieve the detection purpose.
Pipeline endoscope: compared with electronic endoscope, jiutai industrial pipeline endoscope mainly focuses on long detection distance, wide detection range and strong lens care.Generally, the large lens of the endoscope can be adjusted to focus, rotated to 360° and flipped to 220°, so that no dead Angle can be detected.The detection distance can be up to 5 meters to 100 meters.Pipeline endoscope is generally used to test the header and water wall of power plant boilers and other large pipelines. The detection line of pipeline mirror is relatively hard, so the lens can be pushed directly into the tube with the help of lens diameter changing device, and the lens can be kept in the pipeline for easy detection.
Drain Pipe Inspection Robot Camera
Industrial Endoscope,Pipeline inspection camera,Pipe endoscope Inspection Camera,Endoscope Camera,Android Pipe Inspection Camera,Pipeline inspection endoscope camera,Inspection endoscope camera for pipeline,snake inspection camera,inspection camera,Pipe Inspection Camera,Sewer Pipe Camera ,Drain Pipe Inspection Camera,drain inspection camera,underwater inspection camera,Industrial Robot,pipe robot crawler,Pipe Inspection Crawler Robot, Pipe Inspection Robot ,Snake Inspection Camera,video inspection camera ,Borescope,
It was originally introduced from medical endoscope and has been developed till now.
It is usually divided into three types: electronic endoscope, pipeline endoscope and pipeline crawler.
Users can choose different products according to different application environments.
Pipeline crawlers: nine Thai crawling pipeline robot duct endoscope video function similar to, but the ability to independently crawl,
detection distance in 50-400 meters, are usually used in alumina pipeline cleaning quality inspection, wind leaf internal detection, in cable trench,
chemical pipelines corrosion inspection, the municipal pipeline jam inspection, etc.
Industrial endoscope is a kind of testing instrument made according to the principle of optical imaging.
Application : petrochemical, municipal, urban construction, national defense and other fields, lightweight and portable, efficient detection.
Suitable for small pipeline inspection,smallest pipeline diameter 130mm. distance(0-200m) .
Multi-function camera lenses wiht camera cover to protect the camera lens from damage.
Industrial Endoscope Inspection Robot Camera System Accessory
Crawling Robot Camera Parameter :
Camera lens Diameter
360° Infinite rotating,220°radial reversal
10 inch LCD
ZHENGZHOU JIUTAI TECHNOLOGY CO.,LTD
Zhengzhou JiuTai Technology Co.ltd is a high-tech enterprise specializing in research and development, production, sales of endoscopes in the industrial and providing customized solutions for customers , established in 2010. Our company forcuses on the international high industrial technology,up to now company apply for more than 60 patents,many technology are in the leading position in the world. Since the company established has been successful in many endoscope series, such as industrial pipe endoscope series,vessel endoscope series,car endoscope series,crawling robot series,Police endoscope series,wind power vane inspection series.Among these, Especially, GT series endoscopes and crawling robots are famous for their high technology,portable, easy operation,clear images, high efficiency and durability.it is very popular in customers at home and abroad, such as Sinopec, PetroChina, China Five Power Generation Groups etc. Related industry such as technical supervision,energy power,petrochemical,ship construction,rail traffic,food and drug,municipal administration etc.
- Company Name: ZHENGZHOU JIUTAI TECHNOLOGY CO.,LTD
- Representative: Wu Xinheng
- Product/Service: Pipe Inspection Camera , Crawling Robot Pipe Inspection , Industrial Endoscope , Borescope , Video Inspection , Portable Pipe Inspection Camera
- Capital (Million US $): 5000000RMB
- Year Established: 2010
- Total Annual Sales Volume (Million US $): US$1 Million - US$2.5 Million
- Export Percentage: 11% - 20%
- Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
- No. of Production Lines: 5
- No. of R&D Staff: 5 -10 People
- No. of QC Staff: 5 -10 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): Below 1,000 square meters
- Factory Location: Room No. 1009,Xinyuan Financial Square,Jingsan Road,Zhengzhou City
- Contact Person: Mr. Wu
- Tel: 86-371-86630067
Premium Related Products